Description

MKS TMPB05-P 20101006 Circuit Board For Brother Treadmill Motor Controller Pls note: It has not sensor connector,technician integrated its speed measure function to the program, so it has the same function as original old version and works more stable. 1 Confirm right model: Pls noted, this controller have serveral types. Pls send us a photo of your original for confirmation before place a order, thank you very much! part number: MKS TMPB05-P application: For Brother treadmill or other brand treadmill with same-look controller 2 How to determine the failed controller: E01: communication failure,the individual is a sensor failure; E02: controller failure, we want to know which detector is broken, if E02 is best to first test the motor to see if there are any problems motor E03: Sensor fault; general treadmill will turn a few seconds later, there E03; E04: generally over-current fault, this situation is generally burned components on the controller; E08: There may be a lift motor control fault. 3 testing the motor is normal: Please make sure that there is no problem with the motor before you place your order.The motor can be tested by the method shown in the picture below. If the motor running smoothly by 5# battery, that means the motor is good. If running not smoothly or do not running, it means the motor broken.